| Engine 22KW/30HP |
Transmission |
Under Carriage-Rollers |
| 2000RPM |
Clutch Direct Drive Single Dry Disk |
Semi-rigid Track Frame |
| Powerful 3 cyliders long stroke diesel engine |
Diaphragm-spring |
Track Rollers 5+1(each side) |
| Bore/Strock/Cap./Cyl/Aspir. |
Clutch10" or |
Track recoil system Helical Spring, |
| 95mm/105mm/2.23L/3/N |
Hydraulic Reverse Shuttle Clutch |
Screw Adjusted |
| Max. Torque/rpm |
121Nm/1400rpm |
Gearbox |
8 Fwd.+2 |
Width of Track Shoes |
| Lubrication full pressure by rotary pump |
Rev.(Direct-drive) |
300mm(Standard) 11.81" |
| Oprimum fuel consumption |
234g/kw |
or 8 Fwd.+8 Rev.(Reverse Shuttle) |
260mm(Optional) 10.23" |
| Hydraulic System |
Weights and Dimensions |
| Blade & Hitch |
(in Running Order) |
| Capacity @ Governed rpm 25.21pm |
Max. Length |
2960mm-116.5" |
| Relief Valve Pressure 6Mpa(2230psi) |
Max. width (with Blade, Straight) |
1640mm-64.5" |
| Control Valve |
4-spool |
Tractor Width (no Blade) |
| Blade Control |
Lift: Raise , Hold, |
1450mm(Standard) 57.08" |
| Lower, Float Angle: Right, Hold, Left |
1410mm(Optional) 55.5" |
| Tilt: Right, Hold, Left |
Track Gauge |
1150mm-45.27" |
| Blade Capacity |
0.67m3 |
Ground Clearance |
240-245mm-9.44"-9.64" |
| Lifting Cap. @ Hitch Point 7350N(1650 lbs) |
Operating Weight |
| PTO |
2830kg(Standard) 6226lbs. |
| 1-3/8" 6 Spline |
2790kg(Optional) 6138lbs. |
| Mechanical Dependent |
Max. Drawbar Pull |
| 2 Speeds |
540/1000rpm |
2350kg-5170 lbs. (Steel Track Version), |
| Shaft Diameter |
35mm(1-3/8") |
1960kg-4312 lbs. (Rubber Track Version |
Construction Machinery 